MultiTest-dV Motorised tensile tester

A flexible and easy to use stand-alone motorised tensile tester. Also configurable as a basic low-force materials tester. Ideal for routine quality control in a production or laboratory environment.
MultiTest-2-5-dV-with-VFG-no-fixture

The MultiTest-dV is a superior motorised tensile and compression tester offering outstanding value. Designed for precision-controlled compression and tension testing the MultiTest-dV delivers easy to use controls, backed by sophisticated electronics, make it the ideal choice for a wide range of routine testing.

It improves greatly on the variability encountered with manual testers where tension and compression are applied by hand at varying speeds. By applying force at a constant speed, whilst gripping the sample in a uniform manner, the motorised MultiTest-dV significantly enhances the repeatability of test results.

Operators can perform routine batch testing with excellent throughput, minimising testing time, and benefit from the convenience associated with our motorised tensile testers.

The MultiTest-dV is available in two different configurations:

Simple tensile measurement

Test to a target displacement limit or, when using any one of the Mecmesin range of Advanced Force Gauges (AFG), to a load limit or break.

Add VectorPro Lite software to a MultiTest-dV with AFG, for data acquisition, plotting of graphs, calculation of results, plus reporting and exporting of test data.

Sophisticated materials tensile measurement

Fit a dedicated ELS loadcell and connect up to VectorPro MT software to use your MultiTest-dV as an entry-level materials tester.

Control your whole test sequence with simple, step-by-step programmes. Perform both standard calculations like peak, load at displacement and more complex calculations such as Youngs Modulus, and offset yield strength.

Talk to your PPT Group representative for your country about solutions, pricing and support
 

Got a question about this solution?
Get in touch and speak to one of our Technical Sales Engineers now...

Speak to an expert

ttm_motorised-tensile-test-system-with-wedge-grip
ttm_multitest_2.5-dv_ELS-with_extensometer_rubber-dumbell-tensile
ttm_psv19160_dowel_pull_grip_fixture_60
ttm_psv17139_tensile_fixture_for_en_319_500

Tension & Compression

Available loadcells (all measure from zero to the value indicated in the table below)

Model AFG
2.5
AFG
5
AFG
10
AFG
25
AFG
50
AFG
100
AFG
250
AFG
500
AFG
1000
AFG
2500
N 2.5 5 10 25 50 100 250 500 1000 2500
lbf 0.55 1.1 2.2 5.5 11 22 55 110 220 550
kgf 0.25 0.5 1 2.5 5 10 25 50 100 250

Accuracy

±0.1% of full scale. eg. AFG 100 has full-scale capacity of 100 N so is accurate to ± 0.1 N at any point between 0 - 100 N

Resolution

1:5000
Model ELS
2
ELS
5
ELS
10
ELS
25
ELS
50
ELS
100
ELS-S
100
ELS-S
200
ELS
250
ELS
500
ELS-S
500
ELS-S
1000
ELS-S
2500
N 2 5 10 25 50 100 100 200 250 500 500 1000 2500
lbf 0.44 1.1 2.2 5.5 11 22 22 44 55 110 110 220 550
kgf 0.2 0.5 1 2.5 5 10 10 20 25 50 50 100 250

Accuracy

± 0.5% of reading from 5-100% of the loadcell capacity. eg ELS 100 when measuring 10N is accurate to ± 0.05 N or when measuring 50N it is accurate to ± 0.25 N.

Resolution

1:25,000
Displacement

Maximum displacement

1200 mm (0.5kN),  1000 mm (1kN),  500 mm (2.5kN)
47" (0.5kN),  39" (1kN),  20" (2.5kN)

Accuracy

±0.13mm per 300mm travel (±0.005" per 11.8" travel)

Resolution

0.001mm (0.00004")
Speed

Range

0.1 - 1200 mm/min (0.004 - 47.2"/min)

Accuracy

Better than 2% of indicated speed or ±20 µ/min, whichever is greater*
* See help.mecmesin.com for additional info.

Resolution

0.1 mm/min (0.004"/min)
Dimension

Crosshead travel

1186 mm (0.5kN),  986 mm (1kN),  507 mm (2.5kN)
47" (0.5kN),  39" (1kN),  20" (2.5kN)

Throat depth

70.5 mm (2.6")

Height

1616 mm (0.5kN),  1416 mm (1kN),  941 mm (2.5kN)
67" (0.5kN),  59" (1kN),  37" (2.5kN)

Width

290 mm (11.4") (0.5kN to 2.5kN models)
11.4" (0.5kN to 2.5kN models)

Depth

414 mm (16.3") (0.5kN to 2.5kN models)

Weight

31 kg (68 lbs), 0.5kN; 27.5 kg (61 lbs), 1kN; 24 kg (53 lbs), 2.5kN
Common specifications

Voltage

230 V AC 50 Hz or 110 V AC 60 hz

Operating temperature

10 - 35°C (50 - 95°F)

Humidity range

Normal industry and laboratory conditions, non-condensing
Communications

Output of test data from software to PC/printer/datalogger

Yes, via USB

Gallery